Visionary Solutions AVN210 Operation & User’s Manual

39, AVN210 User’s Manual Chapter 7 Using the Browser Interface 33 7.3 System Options Page 7.3.1 Systems Options Section 1) Web Server – displays the current web server functionality. Allows this feature to be enabled and disabled. 2) Telnet Server – displays the current Telnet Serve…

14, Chapter 3 Using the Administrative Privileges AVN210 User’s Manual 8 6. At the Security Menu, to change the Username, type 1 and the current Username will display. Enter a new Username and press Enter, or, to keep the same Username, press Enter. Note: Username and Password can be…

13, AVN210 User’s Manual Chapter 3 Using the Administrative Privileges 7 4. Select the Config Menu. Type 5 and press Enter. 5. Select the Security Menu. Type 13 and press Enter. …

40, Chapter 7 Using the Browser Interface AVN210 User’s Manual 34 once the specified delay is reached. The default value is 5 seconds. For example, if the Stream at Bootup is set to 30 seconds, the encoder will start streaming if a valid input is provided 30 seconds after the unit po…

15, AVN210 User’s Manual Chapter 3 Using the Administrative Privileges 9 4. Navigate the AVN210 menus. Follow Steps 4. through 8. from3.1 Connecting With a Terminal Emulation Program. 5. End the Telnet session. Click Ctrl + ] to return to the prompt, and then type quit. …

32, Visionary Solutions AVN210 Chapter 6 Using the Console Interface AVN210 User’s Manual 26 15) Serial # – displays the serial number. 16) Reset Factory Defaults – resets the AVN configuration settings to the factory default settings. 6.6.1 TTY Menu 1) Display – displays the Port, Baud Rate, Parity, Bits,…