Vitamix PBS Advance 2.0series Use & Care Manual

16, CONTROL PANEL 16 MACHINE ASSEMBLY Installing the Splash Guard and Ice Chute 1. The splash guard attaches to the ice chute and is used to loosely cover the container during operation. Slide the ice chute through the splash guard. The splash guard should not touch the container. …

29, 2929 • This warranty is the sole remedy of the purchaser and sets forth the only obligations of Vita-Mix and does not cover normal wear-and-tear, abuse, misuse, negligent use, alteration of the base or container (or the sound enclosure), or exposure to extreme conditions and is only…

19, Vitamix PBS Advance 2.0series 19 11. Installing the Ice Bin Liner and Ice Bin Lid 1. The ice bin liner rests inside the ice bin and helps separate and distribute the ice cubes for shaving. The ice bin liner may have shifted during shipping and unpacking and should rest level inside the ice bin. 2. To remove the ice b…

24, 4. Empty container and repeat. 5. To rinse, fill ¾ of the container with warm (110° F / 43° C) water. Do not add soap. 6. Return container to the motor base. 7. Use the Start/Stop button to run the blender for 30 seconds. 8. Empty the container and repeat until all soap is gone. 9…

8, 8 Maintenance Tips • Never bang the container against a surface to loosen the ingredients. Remove the container from the base and use a rubber spatula to remove thick mixtures from the bottom of your container. • Never shake or rattle a container while in use. •…

23, 23 Removing Ice from the Ice Bin 1. With the machine o and unplugged remove the ice from the ice bin. 2. Use an ice scoop to remove as much ice as possible from above the ice bin liner 3. Remove the ice bin liner and pour 8 cups (1,9 liters) of warm water in a circular motion in the ice bin a…