Xinpu XP-R40VA Handling Instructions Manual

12, 12 ○ If the bull point or cold chisel is used at the position of “rotation hammering”, the tool can start to rotate, resulting in unexpected accidents. Make sure that they are used at the position of “hammering”. (1) Switching to “hammering” (a) Push the locked Pushbutton, rel…

4, 4 In this operator's manual/or machine’s labels following symbols are used: Read the manual carefully. Accordance with essential applicable safety of European directives. Double insulation. Denote risk of personal injury, loss of life or damage…

8, 8 STANDARD ACCESSORIES (1) Case (Molded plastic)……………………………………………………………1 (2) Side handle ………………………………………………………………………1 (3) Hexagon Bar Wrench (for 6mm screw)…………………

6, 6 b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the off position…

10, 10 APPLICATIONS ○ Drilling holes in concrete ○ Drilling anchor holes ○ Crushing concrete, chipping, digging, and squaring (by applying optional accessories) Assembly Name of the parts (1) Flex Sheath (2) Oil Tank Cover (…

9, Xinpu XP-R40VA 9 3. Large dia. hole boring (Rotation + Hammering ) (1)Drill bit (2) Core bit (3) Core bit shank(SDS－max shank) (1)Drill bit ● Applied to core bits 30mm to 100 mm (2) Core bit ● External dia.30mm,35mm,40mm,45mm,50m,55mm,60mm,70mm，75mm，80mm，85mm，90m…