SpectraLink Link 3000 MCU Installation Manual

14, SpectraLink Corporation Installation Link WTS – Link 3000 MCU Shelf Shelves are designed for 19 inch rack or wall mounting. Each shelf has 12 universal card slots. The first two slots are reserved for controller cards, the remaining ten slots are for Interface Modules. …

29, SpectraLink Corporation Installation Link WTS – Link 3000 MCU 3.9. Connect Cables from Base Stations and Phone Lines to Demarc Blocks Two-pair twisted cable from Base Stations installed throughout the facility converge at the demarc block or backboard. Each Interface Module can support…

11, SpectraLink Link 3000 MCU SpectraLink Corporation Installation Link WTS – Link 3000 MCU 2. Link Wireless Telephone System Description This section generally explains the installation and site requirements of the Link WTS. The Link WTS is a wireless communication system that allows hand-held Wireless Te…

39, SpectraLink Corporation Installation Link WTS – Link 3000 MCU Install Interface Modules (CPA, CPU, CPM, CPP, CPF316) Slide the first Interface Module into Slot 3 of the Primary Shelf, until the card clicks into place. Tighten the screws at the top and bottom of the card to secure it. Slid…

45, SpectraLink Corporation Installation Link WTS – Link 3000 MCU 6. System Initialization Before the system can be tested or operated, the administration and maintenance PC must be installed and connected to the MCU, the system must be configured, and the Wireless Telephones and Base Stati…

44, SpectraLink Corporation Installation Link WTS – Link 3000 MCU Mount and Connect Outdoor Base Stations 1. Mount the outdoor Base Station enclosure to a wall or pole. The enclosure should be attached at the highest point available that will provide central coverage for the outdoor ar…