Amaircare AWW-350 Home Homeowners Manual & Dealer Installation Instructions

12, Amaircare AWW-350 Home 12 Maintenance Proper care and maintenance of your HEPA system will ensure years of service. The unit must be turned off during service/maintenance or when filters are being changed. It is recommended that gloves and a filtered breathing mask be worn during filter replacement. Filter…

9, Preparation: Here are some things to consider as you decide where to install the HEPA system with an HRV/ERV. Location: • Make sure there is room to open the HEPA filter access panel for filter changes/inspections. • Keep the HEPA system in a location where you can still access the…

15, 1. Accessing the motor assembly a. Turn the unit off and unplug it from any electrical source before opening the cabinet. b. Remove the safety screw(s) from the motor section access panel. c. Lift the door up by the finger tabs and pull out to remove it from the unit. 2. Removing the old mot…

18, 18 Replacement Parts Replacement Parts for AWW-350 & AWW-675 (Qty.) Canadian U.S. International Standard Annual Filter Kit (1 Pre-filter, 2 Carbon) 94004061 94014061 94014061 Plus Annual Filter Kit (1 Pre-filter, 1 VOC Canister) 94004181 94014181 94014181 HEPA, Easy Twist Filter 90004437 9001443…

14, 14 Dealer Filter Change Instructions - 8500 & 10000 It is recommended that gloves and a filtered breathing mask be worn during filter replacement to avoid breathing particulates (dust, mold, pollen, etc.) captured on the filter that become airborne during the filter(s) changeout. The old fi…

11, 11 Operation (8500, 10,000 & AWW Units with on/off toggle switch) 1. Make sure that the unit is plugged into a grounded outflow (120 Volt, 60 Hz). 2. For optimum performance, the HEPA system should operate when the indoor air handler/furnace blower is on. 3. Turn the unit on by rotating the vari…