ARRI WCU-4 Operation & User’s Manual

26, 26 Home Screen 10.2 Camera remote The CAM screen displays detailed camera information, if available from the connected camera. The optional ALEXA Remote License (See "Firmware", page 58) offers extended camera setup functionality, including: Frame Rate Shutter Angle Exposure Index Whi…

24, 24 Home Screen 10 Home Screen The Home screen is the default screen. It provides access to the main menu, the focus, iris and zoom menus, and the camera menu; it also activates motor calibration through its soft buttons. In addition the Home screen displays the most important paramete…

69, Appendix 69 • AMIRA • ALEXA Classic • ALEXA XT – Camera control with the UMC-4. ALEXA Remote license needed (See "Miscellaneous", page 67). Following control functions are provided: Frame Rate, Shutter Angle, Exposure Index, White Balance, ND Filter (Amira only), Moni…

62, ARRI WCU-4 62 Menu 11.10.1 Region settings The WCU-4 offers radio settings for different areas (from SUP 02.02.10 and with white-radio module EMIP300). Make sure, that you select the proper area you are operating the device in. All available region settings comply with Part 15 of the FCC rules! 1 Go to MENU &…

44, 44 Menu 11.5 Lens Data The ARRI Lens Data System (LDS) allows display and capture of lens data information provided by cameras or motor controllers. The WCU-4 displays the same lens data on its integrated lens data display. See "Compatibility", page 68 for devices which…

10, 10 Audience and intended use 3 Audience and intended use NOTICE The product is solely and exclusively available for commercial costumers and shall be used by skilled personnel only. Every user should be trained according to ARRI guidelines. Use the product only for the purpose describe…