Schlage AD-200 Operation & User’s Manual

6, 6 • Schlage • AD-200 user guide Cancel construction access mode Do one of the following: • Program the lock with the SUS. See the SUS user guide for more information. • Reset the lock to factory settings. See Reset to factory defaults on page 15 for more information. When const…

5, 5 • Schlage • AD-200 user guide Construction access mode Construction access mode is used to allow access before the lock has been programmed, and for testing purposes. • Enabled by default. • The lock will remain in construction access mode until the mode is cancelled as …

2, 2 • Schlage • AD-200 user guide Contents Overview ...........................................................................................................................3 Lock functions ...................................................................................................…

18, Schlage AD-200 18 • Schlage • AD-200 user guide LED Reference Most LED and beep indicators are congured using the SUS. See the SUS user guide for more information. Schlage button Condition Lights Access denied 2 red blinks Access denied, user outside time zone 4 red blinks Valid PIN…

10, 10 • Schlage • AD-200 user guide L Note: Before creating any credential in the following steps, determine which credential form is desired (see Credential forms on page 6). FREEZE credentials To complete this action: Perform the following steps: Wait for to stop ashing betwe…

3, 3 • Schlage • AD-200 user guide Overview The Schlage AD-200/AD-201 is an off-line electronic lock in the AD-Series product line. The Schlage AD-201 is a FIPS-201-1 certied off-line electronic lock. • May be powered by batteries or connected to external power using a UL294 …