ACS WTAU-100 Technical Manual

1, Technical manual BA 0314 Signal converter WTAU – 100 / 120 / 200 / 220 Isolation amplifier Pt100 – active for galvanic isolation, conversion and adjustment of a Pt100 temperature signal Input signals Pt100 in 2- or 3-wire-technology  Zero value –100°C...+35°C  …

7, WTAU –100 / 120 / 200 / 220 page 7 of 8 Channel 2 Trimmer for zero and end value adjustment only at version WTAU – 200 Function indicator 1 LED for indication of ready status Channel 1 Trimmer for zero and end value adjustment only at version WTAU – 100 …

5, WTAU –100 / 120 / 200 / 220 page 5 of 8 Electrical connection The electrical connection of the device must be carried out according to the respective country specific standards. Incorrect installation or adjustment could cause applicationally conditioned risks…

3, WTAU –100 / 120 / 200 / 220 page 3 of 8 Application The active isolation amplifier of the series WTAU is used to linearize Pt100 temperature signals, to convert it into one resp. two galvanic isolated electrical standard signals or to adjust the signals in the zero value and/o…

8, ACS WTAU-100 WTAU –100 / 120 / 200 / 220 page 8 of 8 Technical data Auxiliary power supply Permitted supply voltage: 20 V to 253 V AC / DC 48...62 Hz,…

6, WTAU –100 / 120 / 200 / 220 page 6 of 8 Electrical connection Connection of the output For the two-wire connection cable between the isolation amplifier and the connected devices a standard installation cable or multi-wire cable for measuring intends with a maxi…