ATN PS-22 Operation & User’s Manual

9, ATN PS-22 8 2 YEAR PRODUCT WARRANTY This product is guaranteed to be free from manufacturing defects in material and workmanship under normal use for a period of 2 (two) years from the date of purchase. In the event a defect that is covered by the foregoing warranty occurs during the applicable period sta…

11, 10 PART NO. DESCRIPTION FIG. ITEM AT 146534.751 Scope Mounting System Insert with 25.4 mm diameter A3 7 AT 146534.752 Scope Mounting System Insert with 30 mm diameter A3 7 AT 146534.753 Scope Mounting System Insert with 38 mm diameter A3 7 AT 146534.754 Scope Mounting System …

4, 3 E D 5 MOUNTING Mounting onto the Weaver rail with 7/ 8” Weaver Mount 1) Mount the 7/8” Weaver Mount (A) onto the body of PS-22 with two screws M4x7 (B) from the kit. 2) Unscrew the protective back cap from PS-22. 3) Screw the Rubber Light Suppressor (C) into the thread at the PS-2…

7, 6 NOTE: The protective lens cap has several small holes in it to allow it to be used as a daylight filter. When using this as a daylight filter you will notice a double vision, this is normal due to the catadioptic lens system. Next move to a dark environment and remove the lens cap. Ob…

5, 4 Mounting onto the objective of the day scope with Scope Mounting System 1) Unscrew the protective back cap from PS-22. 2) Screw the Scope Mounting System body (A) into the thread at the PS-22 back side. 3) Slightly loosen the fixing screw (B) of the Scope Mounting System. 4) Put …

3, 2 APPLICATION The PS-22 is an attachment for daytime scopes with 1x-6x (2.5x-4x are optimal) magnification that converts the scope into a high quality compact night vision scope . The PS-22 mounts in front of a daytime scope. Re-zeroing of a scope is not required. PS-22 comes with a standard…