Benelli Tornado TNT600 Owner's Manual

13, 12 1. Front Brake 2. Gear Shift Pedal Lever 3. Front Foot Pedal 4. Side Stand 5. Rear Foot Pedal 1 2 3 4 5 …

22, 21 This motorcycle comes with the constant mesh six-speed non cyclical gear shifting, the operation is shown as in the gure. The neutral position is between the low-speed gear and two-speed gear, step down the gear shifting lever from the neutral position to select the low-speed gear…

38, 37 The free play of the clutch takes the endpoint position of clutch lever as standard before the loosing of clutch, the free play should be 10—20mm. If the free play is improper, please adjust it in accordance with the following procedures: 1. Loose the locking nut 2. Screw in or…

15, 14 1. Left signal lamp indicator light When the turn signal lamp is turning left, the left steering lamp indicator light will ash. 2. Right signal lamp indicator light When the turn signal lamp is turning right, the right signal lamp indicator light will ash. 3. …

47, Benelli Tornado TNT600 46 Braking system Please check the following conditions of the braking system every day: (1) Check if there is leakage of the front and rear wheel braking system. (2) The brake lever and the brake pedal should have a certain amount of support resistance. (3) Check the wearing co…

45, 44 Both the front and rear wheel of the motorcycle is tted with disc brake. The proper brake operation is very important to the safe driving. Please remember to check the braking system regularly, and this check should be carried out by qualied distributors. Adjustment of Brake (1) Th…