Birlea CORFU Assembly Instructions Manual

1, Vendor: S000053 Page 1 of 6 ASSEMBLY INSTRUCTIONS CORFU BUNK BED IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CORFU BUNK BED FRAME. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. HEALTH & SAFETY: DO NOT jump on this bed frame…

2, Vendor: S000053 Page 2 of 6 Parts List Hardware List (found in box 2) Part Description Box Qty Part Description Qty 1 Upper Frame 1 2 A M8 Metal Square Nut 8 2 Bottom Frame 1 2 B M8 x 95 mm JCBC Screw 8 3 Bottom Base 2 1 C M6 …

3, Vendor: S000053 Page 3 of 6 Step 1: Insert hardware part I to the bottom frame (2) then slot the bottom base (3) into the brackets on the bottom frame. Place the frame connectors (8) onto the bottom frame then insert the upper frames (1) by facing hole to hole as shown in views AA a…

4, Birlea CORFU Vendor: S000053 Page 4 of 6 Step 3: Slot the top base (4) into the brackets on the upper frame (1) and secure using hardware parts A and B at the four corners. Then secure the bottom base (3) using hardware parts A and B at the four corners but do not tighten the screws …

5, Vendor: S000053 Page 5 of 6 Step 5: Secure the horizontal tube of the front rail (6) to the upper frame (1), then secure the front rail to the top base (4) using hardware part E. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step…

6, Vendor: S000053 Page 6 of 6 Step 7: Insert hardware part J onto the upper frame (1) and put hardware part K into the extra 10 mm holes. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Additional Information: • For compl…