Broadcast Tools 8 x 2A Installation Manual

5, 5 8 x 2A Dual Stereo Audio Switcher Installation Manual Broadcast Tools, Inc. Silence Sensor The 8 x 2A Dual Stereo audio switcher is equipped with a silence sensor. The silence sensor as shipped from the factory is configured to monitor output # 1. A jumper is provided to switch to…

8, 8 8 x 2A Dual Stereo Audio Switcher Installation Manual Broadcast Tools, Inc. Connecting the 8 X 2A to a serial port The 8 x 2A Dual Stereo audio switcher is supplied with a modular cable and a modular/9 pin D-connector adapter for serial control. Connect the cable between the …

10, 10 8 x 2A Dual Stereo Audio Switcher Installation Manual Broadcast Tools, Inc. A Status response is of the form: Z<silence_status>1ab2ab3ab4ab5ab6ab7ab8ab<cr><lf> Z is a flag to indicate the start of a status response <silence_status> is: Q - Si…

1, 8 X 2A Dual Stereo Audio Switcher Installation Manual Broadcast Tools, Inc. All specifications and features for this product are subject to change without notice. 8 x 2A Dual Stereo Audio Switcher Installation Manual …

7, 7 8 x 2A Dual Stereo Audio Switcher Installation Manual Broadcast Tools, Inc. Parallel remote control All functions on the 8 x 2A Dual Stereo audio switcher may be remote controlled via a rear panel 25 pin D-connector. The 8 x 2A Dual Stereo audio switcher accepts momentary contact closu…

6, Broadcast Tools 8 x 2A 6 8 x 2A Dual Stereo Audio Switcher Installation Manual Broadcast Tools, Inc. Operating modes: F1 - Set Interlock Mode F2 - Set Mix Mode F1 + F2 - Set Overlap Mode (Default) To select the Interlock mode, unplug the 8 x 2A Dual Stereo audio switcher, and while holding down the F1…