CallingSYS ZJ-41E Operation & User’s Manual

11, 10. Language The watch receiver supports multiple languages, select and press “BACK” button to quit. 11. Prompt mode There are 3 prompt modes when there is calling coming. 1) Vibration 2) Buzzer 3) Vibration & Buzzer Press “UP/DOWN” button to adjust the value. 12. Def…

5, Press the button 2 sec to enter settings; In pairing status, press the button 2 sec to change the cursor position; In pairing status, press the button to delete one paired call button. Press the button 1~2 sec to power ON/OFF the receiver; In standby status, press the button 2 sec to switch o…

4, III Technical Data 1) Working voltage: DC3.7V rechargeable Li-ion battery 2) Working frequency: 433.92MHz 3) Working current: 57mA±10mA (buzzer mode) 95mA±10mA (vibration mode) 4) Standby current: <8mA 5) Power-off current: 180±5μA 6) Receiving sensitivity: -108dBm 7) Decoding: learning cod…

3, User manual of watch wireless calling receiver I Preface The product concentrates the technology of wireless transportation, digital identify, dot matrix LCD display and microprocessor together to realize the functions of time display and wireless calling. The receiver adopts the c…

7, settings. The main settings are: 1. Pair & Delete 1) Pairing call button Select the “Pair & Delete” then press “SET” button to enter the pairing or deleting settings. The screen shows 0000 as below: In the middle of the screen, there are 4 characters position. Pres…

12, CallingSYS ZJ-41E the top of main interface, the signal icon shows X. 2) Low power indication and battery charging When the power capacity icon is close to empty, please charge the battery in time. While connect to the power adapter, the red indicator in the below of the screen will be on, when the charging …