Chauvin Arnoux pel 102 Operation & User’s Manual

21, 21 3.4.5.1. 3-Phase 4-Wire ∆ For 3-Phase 4-Wire ∆ measurements and using three current sensors:  Connect the N terminal test lead to the Neutral conductor  Connect the V1 terminal test lead to the L1 conductor  Connect the V2 terminal test lead to the L2 phase conductor …

69, 69 Fundamental component: component at the fundamental frequency. Harmonics in electrical systems, voltages and currents at frequencies that are multiples of the fundamental frequency. Hz Frequency of the network. I Abbreviation for current. I-CF Crest (peak) factor of current I-THD Total …

6, 6 2. PRODUCT FEATURES 2.1. DESCRIPTION PEL: Power & Energy Logger The PEL 102/103 are simple to use, single, dual-split and three phase (Y, ∆) Power & Energy Loggers. The PEL offers all the necessary functions for Power/Energy data logging for most of the 50 Hz, 60 Hz, 400 Hz and DC…

7, Chauvin Arnoux pel 102 7 2.2. FRONT PANEL FEATURES V1 V2 V3 N 1000V CAT III 600V CAT IV I1 I2 I3V1 V2 V3 N 1000V CAT III 600V CAT IV I1 I2 I3 ON /OFF START/STOP REC OL ON /OFF START/STOP REC OL POWER & ENERGY LOGGERPOWER & ENERGY LOGGER PEL 103 POWER & ENERGY LOGGER 8 9 1 2 6 7 5 4 3 PEL 102 POWER & E…

15, 15 To Start a Recording:  Insert the SD-card into the PEL.  Use the CONTROL button to start or stop a recording session and to enable or disable Bluetooth.  Press the CONTROL button for more than 2 seconds (> 2 s) and hold it down.  The GREEN REC LED (see #1 Figure 11) will …

54, 54 5.3. POWER SUPPLY AC Power (external power supply) - Overvoltage CAT II  Operating Range: 110 V/250 V (± 10%) @ 50/60 Hz  Max Power: 15 VA Battery Power  Type: Rechargeable NiMH battery  Charge Time: 5 hours approx  Recharging Temperature: 10° to 40°C (5…