Chord UP2 Operation & User’s Manual

1, UP2 Portable UHF Wireless System Item ref: 171.920UK, 171.921UK, 171.922UK, 171.923UK User Manual Version 1.0 …

2, Chord UP2 UP2 User Manual Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing this Chord UP2 portable UHF wireless system. The UP2 system is designed to offer a flexible wireless platform …

3, UP2 User Manual Beltpack transmitter controls 1. Microphone input: 3.5mm mono jack 2. Aux line input: 3.5mm stereo jack 3. On/off + CH1-2 slide switch 4. Antenna Beltpack receiver controls 5. Audio/Headphone output: 3.5mm 4-pole jack 6. Recording/Aux line output: …

4, UP2 User Manual Applications The UP2 system can be used for many different wireless applications and can be expanded with additional transmitters and receivers, some of which are outlined below… Application Items used Fitness instructor / product demonstrator 171.920UK …

5, UP2 User Manual Frequency selection The UP2 system has 2 selectable UHF carrier frequencies, which can be used at the same time. However, any transmitter or receiver can only operate on one frequency at a time. Where there is only one speech or audio signal, the selectab…