Cobalt Digital Inc BBG-1090-TRX-MPEG Product Manual

75, 75 The table columns correspond to the licensable features, as follows: • Transcode Instances: This field indicates the number of simultaneous transcode instances the unit is licensed for. • Dolby Decodes: This field indicates the number of Dolby decode licenses the unit is licensed for. A …

57, Cobalt Digital Inc BBG-1090-TRX-MPEG 57 The possible indicator status values are: • OK: The transcoder session is operating normally (it has a valid input and is transcoding that input). • Waiting for Input: The transcoder session is configured and enabled, but it has no input. This can be because it has no connection …

49, 49 IP Outputs: Statistics Tab The Statistics tab for the IP output ports contains a summary of each port status. There are two sub-tabs: one for Ethernet 1, and another for Ethernet 2. The tab is depicted below: Ethernet Port 1 Ethernet Port 2Ethernet Port 1 Ethernet Port 2Ethern…

56, 56 Note that transcoders only support one input connection. If a given transcoder already has an input connection, the corresponding field will not be shown. Transcoder Apply/Cancel Buttons When the Apply button is clicked, the following actions take place: • The transcoder configuration tak…

66, 66 Admin The Admin tab contains a number of general administrative functions, each on its own tab. The general layout is shown below: The Admin tabs are: • General: Manages a number of general card parameters; provides an SNMP MIB download. • Firmware: Manages firmware images. • Config Fi…

37, 37 The IP Input Ports will automatically detect the use of RTP, in a packet-by-packet basis. The BBG-1090-TRX-MPEG will only accept RTP version 2 packets satisfying the following conditions: • No header extensions (X=0) • No CSRC list (CC=0) • Payload type set to MPEG-2 Transport St…