Cohu HD 4260HD Installation Manual

21, - 21 - 3.4.8 Field Cables l All system cables must be shielded, and the shield(s) must be bonded to earth ground. l All Ethernet wiring must be done in accordance with TIA/EIA 568-C standards. To build the camera system cables, CohuHD recommends: l For Ethernet/PoE++: Belden p/n 7919A …

3, - 3 - Table of Contents 1.0 General Information 5 1.1 About this document 5 1.2 Additional information and documents related to the camera system 5 1.3 Copyright/Intellectual Property Rights Statement 5 1.4 FCC compliance 5 1.5 Support services 5 1.6 Returns 5 1.7 Shipment 6 2.0 Safety Instr…

23, - 23 - 3.4.9 4260HD CohuHD- Manufactured System Cables CohuHD-manufactured cables are available for 4260HD series camera systems using PoE++, 24 Vac or 120 Vac. For detailed information, download cable drawings from the CohuHD website: http://www.cohuhd.com/Support/Product-Docume…

7, - 7 - 2.0 Safety Instructions 2.1 Important Information Warning: Do not remove the covers or housing. There are no user-serviceable parts inside. Warning: The Schrader Valves on the camera head's back plate are for factory use only. Do not attempt to add any gas to the camera head. …

31, - 31 - 3.6.5 Corner Mount Installation Use the mount adapter, wall mount, and large corner mount for installation to a corner. See "Corner Mount" on page 40. 3.6.6 Parapet Mount Installation Use the mount adapter, wall mount, and parapet mount for installation to a para…

24, Cohu HD 4260HD - 24 - 3.4.9.1 4266 HD Cable Compatibility The 4266 HD camera system is designed to be compatible with many existing field cables for 24 Vac systems, and with a power conversion junction box for 120 Vac systems. If the 4266 HD camera system is intended to be a replacement for an existi…