Comnet CWGE24MS2 Installation And Operation Manual

238, INS_CWGE24MS2_REV– 10/05/16 PAGE 238 INSTALLATION AND OPERATION MANUAL CWGE24MS2 TECH SUPPORT: 1.888.678.9427 CLI Configuration Mode Command Description Enable show tacacs-plus To show the Tacacs+ Statistics. configure tacacs-plus server-host <ipaddr> To set the Tacacs+ Server IP a…

22, Comnet CWGE24MS2 INS_CWGE24MS2_REV– 10/05/16 PAGE 22 INSTALLATION AND OPERATION MANUAL CWGE24MS2 TECH SUPPORT: 1.888.678.9427 GUI Login Parameter Description User ID Enter the user name. Password Enter the password. Default: User name: admin, Password: admin. CLI Configuration Node Command D…

234, INS_CWGE24MS2_REV– 10/05/16 PAGE 234 INSTALLATION AND OPERATION MANUAL CWGE24MS2 TECH SUPPORT: 1.888.678.9427 CLI Configuration Node Command Description enable show port-security This command displays the current port security configurations. configure port-security (disable|enabl…

18, INS_CWGE24MS2_REV– 10/05/16 PAGE 18 INSTALLATION AND OPERATION MANUAL CWGE24MS2 TECH SUPPORT: 1.888.678.9427 Note: Ensure that the terminal or PC you are using to make this connection is configured to match the above settings. Otherwise the connection will not work. Then press [ENTER] to …

76, INS_CWGE24MS2_REV– 10/05/16 PAGE 76 INSTALLATION AND OPERATION MANUAL CWGE24MS2 TECH SUPPORT: 1.888.678.9427 Web Configuration General Settings Parameter Description IGMP Snooping State Select Enable to activate IGMP Snooping to forward group multicast traffic only to ports that are m…

100, INS_CWGE24MS2_REV– 10/05/16 PAGE 100 INSTALLATION AND OPERATION MANUAL CWGE24MS2 TECH SUPPORT: 1.888.678.9427 Web Configuration VLAN Settings Parameter Description VLAN ID Enter the VLAN ID for this entry; the valid range is between 1 and 4094. VLAN Name Enter a descriptive nam…