Consew 7360R Parts & Instruction Manual

1, [,.DJVt tl IIV® CONSOLIDATED SEWING MACHINE CORP. MODEL 7360R 7360RH 7360RB PARTS & INSTRUCTION MANUAL From the library of: Superior Sewing Machine & Supply LLC …

5, ADJUSTING THE TIMING OF THE TENSION DISCS Within the presser foot lift range, the timing of the tens-ion discs can be adjusted as follows: Remove the rubber plug from the back of the arm and loosen the screw (A) of the knee lift lever (left). Move the ten…

14, ARM SHAFT AND VERTICAL SHAFT MECHANISM e eo l, I (-J ~- No. Ref. No. Descrip:ion M 1 124T3 -001A1 Arm shaft 1 2 124T3 -OOIA2 Adjusting screw 1 3 2213 -00281 Collar for arm shaft 1 4 22T3 -00282 Set screw 2 5 124T3 -00281 Arm shait bushing(ieft) 1 6 124T3 …

18, PRESSER FOOT MECHANISM Pes. No Ref. No. Description -- f------ M H B 1 22T7 --001A Presser bar lifter 1 1 1 Pes. No. Ref. No. Description M H 8 16 22T7 -008 Pin for spring 1 1 1 2 22T7- 006 Set screw 1 1 1 17 22T7 -009 Presser bar bushing 1 1 …

2, Before putting a new machine into operation, remove the plugs (A) on the top of the arm and replenish the oil supply. Lift the presser foot and run the machine at a low speed of 2000 spm to check that the oil is being distributed correctly by inspecting the win…

4, Consew 7360R CONNECTING THE CLUTCH LEVER TO THE PEDAL The optimum tilt angle ofthe pedal is approximately 15 degrees. Adjust the clutch so that the clutch lever (c) aligns with the draw bar (B) as shown in Fig. 6. The machine pulley should rotate counter clockwise when v…