Craftex CX413 Operation & User’s Manual

4, 4 READ and follow all the instructions and safety precautions in the user manual before setup or use. THIS DUST CYCLONE is designed for wood dust only. It is not to be used for other materials such as liquids or metal scraps but not limited to, nails and fillings. It is also not …

11, 11 Place the PE bag (#23) into the drum (#48) and place the inner frame inside the PE bag in order to press the bag down. Figure-12 Placing the bag inside the drum with the inner frame Pull down the quick lever and thread the nut (#41) onto the quick lever thread and tighten i…

7, 7 UNPACKING The machine is properly packaged and shipped completely in carton for safe transportation. When unpacking, carefully inspect the carton and ensure that nothing has been damaged during transit. Figure-1 Inventory List of Contents Qt…

9, Craftex CX413 9 ASSEMBLY Attach the base wheels (#24) to the base (#25) using the 5/16" x 1/2" flange bolt screws (#17) provided. See figure-1. Secure the stand (#22) onto the base (#25) using the 5/16" x 3/4" flange bolt screw (#8). Figure-4 Installing the stand an…

17, 17 WARRANTY Craftex warrants every product to be free from defects in materials and agrees to correct such defects where applicable. This warranty covers three years for parts and 90 days for labour (unless specified otherwise), to the original purchaser from the …