Danbit H.264 DVR Operation & User’s Manual

98, 98 B-1 AUTHORITY SETTING: Enable or Disable these options to limit the authority. B-2 USER MANAGEMENT: Add: Key-in the Username and Password. The manager can give authority to the new user by ticking at the choice below. (Ex. Ticking at “PTZ” allows the new…

86, 86 Then, the IPInstallerEng.exe will popup. The NVR default IP address is 192.168.1.220 NOTE: Please input correct network parameters without blank spaces. On “Device Lists”, the software lists all servers. By clicking on the …

72, 72 C. DISPLAY CONTROL On live-view or playback mode, use display control to switch the camera channels. D. DIGITAL ZOOM On live full screen mode, left-click to select a zoom-in or zoom-out range for the image. The users can right-click for disabl…

41, 41 Click the tag “Full Recording”(Red) / “Alarm Recording”(Yellow) / “No Recording”(Green), and then draw on the calendar. The recording type will follow the schedule. The tag “Alarm Recording” includes all the alarm types. b. Mail Schedu…

46, 46 D. Alarm Action and Trigger Condition List Action \ Type Motion detection External Alarm DI (IP CAM) Video Loss Necessary Condition (All the actions below can be execute only when the necessary condition is met.) Camera Setup >>Motion Setup >>Tick "Are…