Dante DLS1101 Installation And Operation Manual

17, 17 f) BYTE6: The value of Check Sum from ‘BYTE1’ to ‘BYTE5’. Ex) In case of transmission, ‘0x05, 0xF0, 0x10, 0x00, 0x25’ 0xC5 + 0xF0 + 0x10+ 0x00+ 0x25 = 0x1EA Therefore, CS=0xEA 2. The communication data format Camera to PC; The data of total …

23, 23 6. Non Zoom Tracking PRESET control: Move the Zoom and Focus lens to each position and set the Digital Zoom ratio according to data memorized in PRESET Buffer RAM designed ‘INDEX’ 1) PC=>Camera 0xC5 0x4D INDEX 0x00 INDEX CS 2) Camera->PC 0xC5 0x4D INDEX 0x…

16, Dante DLS1101 16 APPENDIX 2. RS-232C / RS-485 Protocol CONNECTION CONDITION Speed: 9600/19200 BPS (Default is 9600 BPS) Data bit: 8 Bits Parity bit: None Stop bit: 1 Bits Flow control: None Use the RXD, TXD and GND in RS232C pins. NOMAL COMMUNICAITON FORMAT Command: It is t…

12, 12 APPENDIX 1. OSD FORMAT Following are the camera adjustments that can be made by pressing “OSD” button the side. Use the menu on the following page to reference the explanations of each adjustment. FIGURE 2. OSD MAIN SCREEN 1. Camera title. 2. Status of…

27, 27 15. White Balance Mode Set Command (0xAA & 0x60 series Command) ; Set the mode of White Balance according to WB_CNT. 1) PC=>Camera 0xC5 0xAA 0x65 WB_CNT CAM_ID CS 2) Camera->PC 0xC5 0xAA 0x65 WB_CNT 0x65 0xXX 0xXX 0xXX CS a) WB_CNT : T…