Digi-Sense 20250-59 Operation & User’s Manual

10, 10 Voltage test Voltage range 6, 12, 24, 50, 120, 230, 400 VAC/DC, 690 VDC Resolution 1 VAC/DC Tolerances DCV: +1.0% rdg + 3 digits ACV: +1.5% rdg + 5 digits 400 VAC Max. measuring current Approximately ≤1.0 mA 690 VDC Max. measuring current Approximately ≤1.5 mA Voltage detection Autom…

6, 6 Setup and Operation Measuring Point Lighting The voltage tester has a battery-operated measuring point lamp. Press button (9) to switch this lamp on. The lamp stays on as long as this button is pressed. When the button is released, the lamp goes off. The lighting button is arranged in…

12, 12 Maintenance and Repair Maintenance and Disposal Check the correct operation of the voltage tester regularly. It can be assumed that risk-free operation is no longer possible if: • There is visible evidence that the device has been damaged. • The device has been stored…

13, 13 Battery Replacement The voltage tester is powered by two AAA batteries supplied with the instrument. They are replaced as follows: 1. Loosen the screw on the battery compartment lid (10) with a screwdriver and remove it. 2. Insert two AAA batteries into the compartment…