Dish Network WALLY Setup Manual

14, 11. Returning Your Original Receiver a. Pack your original receiver and power cord in the protective bag. b. Place the receiver and power cord in the box that the new receiver came in. c. Locate the original shipping label on the box and remove it using the red tab. Continue to…

13, 10. Activating Your Wally a. b. Once your Wally is activated, the System Setup wizard will authorize your Wally. This process will take 10-15 minutes to complete. Once complete, the System Setup wizard will automatically proceed to the next step. c. To begin using your Wally, us…

12, Dish Network WALLY 9. Testing Your Hopper Connectivity to the Internet b. Using the arrows on your remote control, highlight "Next" and then press the SELECT. a. Wait while your Wally tests the Internet connectivity. This process will take 1-3 minutes to complete. When complete, the Syst…

11, c. Using the arrows on your remote control, highlight "Pair with Remote Control," and then press the SELECT. d. Using the arrows on your remote control, highlight "TV PAIRING WIZARD" and then press the SELECT. The TV Pairing wizard will now walk you through step-by-s…

7, 5. Acquiring a Satellite Signal b. a. Wait while the satellite signals are acquired. Once complete, the system will proceed to the next step automatically. If you see red "Xs" in the installation test box, make sure your "Home Video Network" cable is connected to your…