DURKOPP ADLER 969 ECO Operating Manual

41, Operation Operating manual 969 - 00.0 - 08/2014 39 5.7.2 Setting hook thread tension Fig. 20: Adjusting the hook thread tension WARNING Risk of injury from moving parts. Turn off the machine before tensioning the hook thread. ATTENTION Pulling the thread in the wrong direction while measuring…

67, DURKOPP ADLER 969 ECO Operation Operating manual 969 - 00.0 - 08/2014 65 ESC Escape key, cancel P Programming key Ready to be pro- grammed LED on + Increase the value - Decrease the value OK Confirmation Reset Bobbin supply Key Function Status LED display …

78, Maintenance 76 Operating manual 969 - 00.0 - 08/2014 Water condensation will accumulate in the water separator of the maintenance unit. Fig. 41: Water level in the maintenance unit Check water level: 1. Check the water level every day. Important: Water condensation must not rise …

77, Maintenance Operating manual 969 - 00.0 - 08/2014 75 6.3 Checking pneumatic system Fig. 40: Pressure indicator on maintenance unit Check pressure: 1. Check the pressure and pressure gage (2) every day. Standard value: 6 bar Important: The pressure must never deviate from the standa…

38, Operation 36 Operating manual 969 - 00.0 - 08/2014 Thread tension for decorative stitching When using a decorative stitch, a thicker thread is normally used with a relatively thinner material. Then the thread interlace is not buried in the material. In this instance, the tension is set so …

69, Operation Operating manual 969 - 00.0 - 08/2014 67 3. Slide the folding part of the table plate (2) approx. 10 mm to the left and then fold it to the rear in the direction of the arrow. 4. Fold the machine head (1) back to the working position. ATTENTION When returning the folding part of the…