Durst Omega 2 Operating Instructions Manual

10, B Safety Omega 2 BSafety Read these operating instructions before using the printer and ensure that you have understood everything! If it is determined that damage has been caused by a person's non-compliance with these operating instructions, Durst Phototechnik AG is in no wa…

16, Durst Omega 2 B Safety Omega 2  Ink supply unit with Durst re fill tank  Carriage guide  Light trap carrier  Uncuredinksonprintedmediaduetoinsufficient UV exposure Observe the safety data sheets supplied with the ink. Operate the printer with Durst inks only. Wear protective gloves and safet…

59, Omega 2 F Softw are Fig. 41 Maintenance tab Some activities described in the "Service" part can be called up directly in this tab as a PDF or film. 4.5 Ink batch tracking You can document the refill date, color and batch number of the ink on the Ink Batch Tracking tab. 200…

68, H Service Omega 2 H Service 1 Inspection and cleaning intervals If a test image was printed after the print heads were cleaned, the software saves t his information. Warranty and guarantee claims can only be made if the following conditio ns are ful fi lled: – The test images made after wiping w…

58, FSoftware Omega 2 4.3 Ink heating You c an call up the print head temperature and print head heating on the Ink Heater tab. Fig. 40 Ink Heater tab Calling up print head temperature Whentherespectivebuttonisclicked,thec urrent temperature for each color and print head is displayed. The top line …

76, H Service Omega 2 9 Cleaning UV LED Soiled emission windows reduce the UV output power. In case of high utilization, the cleaning interval may need to be shorten ed. Tools/Accessories:  Dry paper towels  Razor blade with holder  3M Scotch Brite abrasive fleece  Sciss…