EAT C-Major Operating Manual

14, 5. Leveling the turntable Three precision adjustable damped feet are mounted under the turntable for leveling the turntable. Once the turntable is in final position, put the supplied spirit level on the carbon fiber sub-chassis, and then level the turntable by screwing or unsc…

5, Key: Controls, Features and Connections 1. ON/OFF switch 2. Platter with bonded vinyl mat 3. Record clamp 4. Tonearm counterweight 5. Tonearm lift lever 6. Tonearm rest 7. Headshell with finger lift 8. Anti-skating mechanism 9. Floating sub-chassis 10. RCA output with earth connection…

12, 12 4.7 Anti-skating assembly and adjustment The anti-skating mechanism is shipped partially disassembled to avoid damage during transport. For correct installation, please follow the steps below. Step 1: Prepare all parts supplied from the accessories bag: • Anti-skating sliding mechanism wit…

11, 11 4.5 Vertical Tracking Angle setting (VTA) To set the Vertical Tracking Angle, first put a record on the platter. When the needle is lowered into the record groove, the tube of the tonearm should be parallel to the surface of the record. If it is not, lo…

9, 9 4.1 Cartridge installation* Install the cartridge into the aluminum headshell, using the appropriate hardware included with your cartridge. Connect the cartridge as indicated below: • White • Red • Green • Blue left channel L+ right channel R+ right channel R- left channel L- …