American DJ Water Column/4 Assembly Instructions Manual

6, Notice: Do not use the ground lug on the XLR connector. Do not connect the shield conductor to the ground lug or allow the shield conductor to come in contact with XLR outer casing. Grounding the shield could cause a short circuit and erratic behavior. Line Terminator: When lo…

3, Affordable Quality Lighting Products from American DJ ® Los Angeles, CA. 90058 USA Page 3 Figure 6 Figure 8 Figure 7 Figure 9 Connect the air hose to water column tube by inserting the rubber tube into the plastic nipple located on the bottom of the tube (see figure 6). Step 4 ASSEMBLY INSTRUCTI…

2, Begin assembly by removing the outer protec- tive collar assembly. Remove the four (4) black, phillips screws from tube collar located on the top of water column base (see figures 2 and 3), to remove the collar. Remove the collar assem- bly. Affordable Quality Lighting Products from Am…

1, American DJ Water Column/4 SPECIFICATIONS: MODEL - Water Column™ Weight: 16 lbs.Without water Size: 53.5” x 11” x 10" Lamps: EXN 12V 50W Fuse: 3A Supply Voltage: 120V Tube capacity: Approx. 2.5 gal Tube Dimensions: 48” X 3.25” Colors: 8 plus White American DJ ® Assembly Instructions Affo…

4, Figure 10 Secure the collar with the four (4) included black, phillips screws. Step 8 ASSEMBLY INSTRUCTIONS CONT. OPERATING INSTRUCTIONS PROPER WATER INST ALLATION Due to the excessive weight of water filled in the tube, we suggest that you place the water column in it’s final position bef…