Elektron analog drive Operation & User’s Manual

9, 9 . PANEL LAYOUT AND CONNECTIONS . FRONT PANEL CONTROLS Manual Focused Dist Big Dist Dirty Drive Mid Drive Clean Boost Harmonic Fuzz High Gain Thick Gain Gain Level HighMidActiveMid FreqLow Preset Out In Analog Drive Multi-circuit analog distortion unit Bypass / Select 1 2 3 4 5 7 815 10…

11, 11 . CONNECTING THE ANALOG DRIVE Place the Analog Drive on the floor, or other stable support such as a sturdy table, with sucient cable space. Before you start connecting the Analog Drive to other equipment, make sure all units are switched o. 1. Plug the supplied power adapter…

12, 12 LOADING A PRESET Method 1 1. Turn PRESET to select the desired preset. The display blinks to indicate that the preset is not yet loaded. 2. Press PRESET to load the selected preset. Method 2 1. Press [FOOTSWITCH LEFT] (decrease) or [FOOTSWITCH RIGHT] (increase) to select the desired preset. …

7, 7 TABLE OF CONTENTS . INTRODUCTION.....................................................................................8 . CONVENTIONS IN THIS MANUAL ..........................................................8 . PANEL LAYOUT AND CONNECTIONS .....................................…

18, Elektron analog drive 18 APPENDIX A: MIDI This appendix lists the MIDI specifications for the Analog Drive. • Program change: 0—99. • CV-mode: 10 bits, 7 in MSB, 3 in LSB. MSB=64 equals 0 V. • Expression pedal mode: 9 bits. 7 in MSB, 2 in LSB. • MIDI CC: 8 bits. 7 in MSB, 1 in LSB. MIDI…

15, 15 Setting Display Description Output Channel Sets the MIDI channel that Analog Drive uses to send MIDI data. No MIDI data is sent when set to OF (OFF). (Range 1—16, OF) Output Thru Sets the behavior of the MIDI OUT port. OF = O. Only sends data from the pedal. ON = On. Forwards d…