Elsner AQS/TH PF Installation And Adjustment Manual

5, 3 Description Ventilation Control AQS/TH PF • Version: 31.01.2017 • Technical changes and errors excepted. 1. Description The Ventilation Control AQS/TH PF combines sensor system and control technology for the ventilation system. Temperature, humidity and CO 2 level of the air are monitored…

27, 25 Use of the device, manual airing Ventilation Control AQS/TH PF • Status: 31.01.2017 • Technical Changes and Errors excepted. 5.3. Operation modes Automatic mode (Auto) and manual mode: In automatic mode, the window or the ventilator is controlled in such a way that the nominal values set ar…

6, 4 Description Ventilation Control AQS/TH PF • Version: 31.01.2017 • Technical changes and errors excepted. * Please note the information on measuring accuracy below. The product conforms with the provisions of EU directives. 1.1.1. Measuring accuracy Follow the instructions in chapter Insta…

13, 11 Basic setting Ventilation Control AQS/TH PF • Status: 31.01.2017 • Technical Changes and Errors excepted. 3. Basic setting For operational start-up, some basic settings of the device and the drive connected must be adjusted. Parameters in the basic settings menu: (Adjustment …

23, Elsner AQS/TH PF 21 Adjust automatic ventilation system Ventilation Control AQS/TH PF • Status: 31.01.2017 • Technical Changes and Errors excepted. CO 2 level Step 2 opens at < 75 % > Switch from step 1 to step 2 (2-level ventilation system only) Decide when the automatic ventilati…