EXFO FIP-400 Operation & User’s Manual

22, Inspecting Fiber Ends 20 FIP-400 Inspecting Fiber Ends with a Computer Capturing Video You can capture the video into an image directly without stopping or freezing the video. The application suggests a file name you can use directly or you can modify if needed. For more information, see Configu…

19, Inspecting Fiber Ends Fiber Inspection Probe 17 Inspecting Fiber Ends with a Computer To inspect fiber ends: 1. Install a probe tip (see Changing the Fiber Inspection Probe Tip on page 12). 2. Insert the fiber into the probe tip. 3. Connect your Fiber Inspection Probe to the USB video adapter, a…

39, Index Fiber Inspection Probe 39 Index A after-sales service ........................................ 31 application exiting ................................................... 16 starting.................................................. 16 autonaming settings ...........................…

31, EXFO FIP-400 Troubleshooting Fiber Inspection Probe 31 Contacting the Technical Support Group Contacting the Technical Support Group To obtain after-sales service or technical support for this product, contact EXFO at one of the following numbers. The Technical Support Group is available to …

11, Fiber Inspection Probe 7 2 Setting up Your Fiber Inspection Probe Selecting the Language of Operation You may display the user interface in one of the available languages (default is English). Values are kept in memory when you turn off the unit. To select a new interface language: …

10, Introducing the FIP-400 Fiber Inspection Probe 6 FIP-400 Conventions Conventions Before using the product described in this manual, you should understand the following conventions: Note: The screen shots found in this user guide were made on a computer running Windows XP. Appearan…