Faulhaber Series MCBL 3002/03/06 RS/CF /CO Technical Manual

19, 19 3 Installation 3.3 Connections 3.3.7 Shielding the motor wiring The encoder and signal lines are susceptible to interference, which makes it impossible to specify a maximum cable length. Shielded wires must always be used for cable lengths > 300 mm. In general it is necessary to ensure that…

6, 6 1 Important Information 1.2 Safety instructions Observance of the following safety instructions is prerequisite for trouble-free and safe operation of the drive. Therefore, please carefully read through all the notes and follow them when using the drives. Intended use The FAULH…

2, 2 Imprint Version: 3rd edition, 18.03.2013 Copyright by Dr. Fritz Faulhaber GmbH & Co. KG Daimlerstr. 23 / 25 · 71101 Schönaich All rights reserved, including those to the translation. No part of this description may be duplicated, repro- duced, stored in an information system or proces…

32, Faulhaber Series MCBL 3002/03/06 RS/CF /CO WE CREATE MOTION DR. FRITZ FAULHABER GMBH & CO. KG Antriebssysteme Daimlerstraße 23 / 25 71101 Schönaich · Germany Tel. +49(0)7031/638-0 Fax +49(0)7031/638-100 [email protected] www.faulhaber.com MA05038 English, 3rd edition, 03.2013 © DR. FRITZ FAULHABER GMBH & CO. KG Subject t…

1, WE CREATE MOTION EN Motion Controller Series MCBL 3002/ 03 / 06 RS / CF / CO Series MCDC 3002 / 03 / 06 RS / CF / CO Series MCLM 3002 / 03 / 06 RS / CF / CO Technical Manual …

28, 28 3 Installation 3.6 Baud rate and node number / node ID NOTE The baud rate and node number necessary for the communication link are set via the Motion Man- ager or as a direct command input. Please read the relevant function and communication manual and the Motion Manager&apos…