American Dryer Corp. AD-20 Installation Manual

4, WARNING The dryer must never be operated with the back guard removed. PERSONAL INJURY OR FIRE COULD RESULT. IMPORTANT PLEASE OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment and/or specified in the installation manual included with the dryer. WARNING DRYER MUST NEVER BE OPERAT…

25, 21 2. Technical Gas Data a. Gas Specifications * Measured at outlet side of gas valve pressure tap when gas valve is on. b. Gas Connections Inlet connection -------------3/8” N.P.T. Inlet supply size -------------3/8” N.P.T. (minimum) Btu/hr input (per dryer) ----40,000 (10,0…

26, 22 3. Piping Connections ALL components/materials must conform to National Fuel Gas Code Specifications ANSI Z223.1-LATEST EDITION, or in Canada, CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION (for General Installation and Gas Plumbing), as well…

23, American Dryer Corp. AD-20 19 IMPORTANT: Figures shown are for non-reversing models ONLY. IMPORTANT: The wire size must be properly sized to handle the related current. NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation. Gas Electric AD-20 ELECTRICAL SERVICE SPECIFICATIONS …

24, 20 G. GAS INFORMATION It is your responsibility to have ALL plumbing connections made by a qualified professional to assure that the gas plumbing installation is adequate and conforms to local and state regulations or codes. In the absence of such codes, ALL plumbing connectio…