Fluke Biomedical ESA612 Getting Started Manual

27, Electrical Safety Analyzer Cleaning the Analyzer 15 5. Using a multimeter, measure the continuity of each fuse. If one or both fuses do not show continuity, replace the fuse(s) with fuses that have the same current and voltage rating. Appropriate fuse ratings are po…

19, Fluke Biomedical ESA612 Electrical Safety Analyzer Instrument Familiarization 7 Figure 2 and Table 3 describe the side and top-panel connections of the Analyzer. TEST RA LL LA RL V1 RFL NC1 RA LL LA RL V1 R FLN C1 2 *Old versions have a B style connector for USB port. Old Version* 7 1 6 5 9 3 4 8 …

6, Restrictions and Liabilities Information in this document is subject to change and does not represent a commitment by Fluke Biomedical. Changes made to the information in this document will be incorporated in new editions of the publication. No responsibility is assumed by Fluke Biomedic…

8, ESA612 Getting Started Manual ii Detailed Specifications ................................................................................................... 20 …

16, ESA612 Getting Started Manual 4 • The Analyzer must be properly earthed. Only use a supply socket that has a protective earth contact. If there is any doubt as to the effectiveness of the supply socket earth, do not connect the Analyzer. Do not use a two-conductor adapter or exten…