FOR-A FA-9500 Operation Manual

199, 183  AES Audio Mono Sum Parameter Default Setting range (Steps) Description CH 1/2-CH 7/8 Disable Disable Enable Enable: Outputs the stereo pair channels as a mono sum. NOTE To change the Source signal assignments, see section 9-3-4 “Source Select”. For details on how to …

219, FOR-A FA-9500 203  ANC Data Embed Parameter Default Setting range Description ANC CEA608 CC CEA608 CC S334-1 CC SD CEA708 CC HD S2016-3 AFD RP186 VI BT1119 WSS Selects an ancillary data type to be inserted into SDI signals. Format * Selects a video format compatible with…

84, 68 5-10-7. SD PHASE SET SD PHASE SET 97 H PHASE: 0CLK V PHASE: 0LINE SC PHASE: 0.0° Parameter Default Setting range (Steps) Description H PHASE *1 0 -864 - 864 ( CLK) Adjusts the horizontal and vertical phases of the system referring to genlock s…

243, 227 9-8. Network Settings If the user name and password are not set in the USER SETTING page (see section 9-8-5), the Logout is not shown. Click the Network tab at the top of the page. The Network page will be displayed. Click NETWORK SETTING in …

39, 23 5-3. CONV1 (UP/DOWN/CROSS CONVERTER) Both converters, CONV1 and CONV2, can equally output video signals in formats specified for respective output connectors, and convert the aspect ratio according to the S2016, VI, or WSS AFD (Active Format Description) data. The video signal select…

238, 222 9-7-4. ANC Status Click Refresh to update the settings.  Ancillary Input Stats Displays the status of CEA608, WSS, and VI ancillary data detection. The line number in which the ancillary data is in is displayed.  AFD Inp…