Genave SR418 Operation & User’s Manual

10, SR418 SR418 User Manual 9000-0000-098 Revision 01 10 of 11 Genave Electronics Receiver The SR418 receiver has 8 outputs which activate whenever the corresponding button is being pressed on the transmitter. The power requirements for the SR418 receiver is 5 to …

11, SR418 SR418 User Manual 9000-0000-098 Revision 01 11 of 11 Genave Electronics Pairing of Tx to Rx To pair the receiver to a transmitter: 1) Press the “Learn” button on the receiver. 2) The “MODE” LED will start flashing. 3) While MODE flashes, press a…

2, Genave SR418 SR418 SR418 User Manual 9000-0000-098 Revision 01 2 of 11 Genave Electronics           Important Safety Information Installation & Service Precautions Electrocution, severe personal injury and damage to equipment can occur during instal…

9, SR418 SR418 User Manual 9000-0000-098 Revision 01 9 of 11 Genave Electronics MODE LED CREATE button Setting the Transmitter Address The Long-Range Handheld Transmitter allows the selection of one of 16,777,216 unique addresses. All transmitters are shipped with a …

5, SR418 SR418 User Manual 9000-0000-098 Revision 01 5 of 11 Genave Electronics Product Overview Basics The SR418 Control consists of a Transmitter unit and a Receiver unit which communicate on a frequency of 418MHz and have a range of up to 800 feet. When a button is p…

7, SR418 SR418 User Manual 9000-0000-098 Revision 01 7 of 11 Genave Electronics Setting the Transmitter Address The Long-Range Handheld Transmitter allows the selection of one of 16,777,216 unique addresses. All transmitters are shipped with a unique address to avoid …