Haiku L3127-X5 Installation Manual

31, 29 HAIKU® HOME Insert the steel pin (a) into the hole at the top of the extension tube, and then slide the mounting ball upward, seating the steel pin in the inner slots of the ball. Mounting Ball Hardware: a. Steel pin Insert the wedge (b) into the mounting ball as shown, and then…

16, 14 REV. C ● © 2015 HAIKU HOME. ALL RIGHTS RESERVED. INSTALL THE MOUNTING BRACKET (WOOD CEILING JOIST) 3c a b (not supplied) ceiling joist …

5, Haiku L3127-X5 3 HAIKU® HOME Mounting Bracket Control Box Wiring Cover LED Diuser Ring Mounting Ball and Hardware† Lower Cover Trim Lower Cover Ring Extension Tube†† Motor Unit (3) Airfoils Remote Control Hardware Pack Wiring Harness††† Wall Control Wi-Fi Module†††† PARTS…

28, 26 REV. C ● © 2015 HAIKU HOME. ALL RIGHTS RESERVED. ARRANGE LED DIFFUSER RING, WIRING COVER, AND MOUNTING BALL 9 a b c Do not seat the LED diuser ring in the wiring cover at this step! …

39, 37 HAIKU® HOME Insert the control box (a) into the mounting bracket as illustrated. Be careful not to pinch the wires between the mounting bracket and control box! Snap the LED indicator (b) into the gap in the mounting bracket. Make sure it is securely seated. STEP COMPLETED 2 1 …