Hand Held Products 2020 Operation & User’s Manual

62, Hand Held Products 2020 3 - 8 2020/4820/4820 i User’s Guide Image Scanner Name You may assign a name to each image scanner you are using. When you have multiple image scanners linked to one base, you may want to name each image scanner so you will be able to control the image scanner receiving imaging com…

7, Required Safety Labels Scanner Compliance Label locations Item Number, Serial Number and Revision Information location …

159, 14 - 6 2020/4820/4820 i User’s Guide 2. If the image scanner still can’t read the sample barcodes, scan All Symbologies on page 7-2. …

63, 2020/4820/4820 i User’s Guide 3 - 9 To rename image scanners with sequential, numeric names, scan the barcodes below. Scan the Reset code after each name change and wait for the scanner to re-link to the base before scanning another barcode to rename the next image scanner. Alternatively, …

33, 2020/4820/4820 i User’s Guide 2 - 3 IBM 4683 Ports 5B, 9B, and 17 Interface Scan one of the following “Plug and Play” codes to program the image scanner for IBM 4683 Port 5B, 9B, or 17. Note: After scanning one of these codes, you must power cycle the cash register. Each barcod…

26, 1 - 6 2020/4820/4820 i User’s Guide Connecting the Base with RS-232 Serial Port 1. Turn off power to the terminal/computer. 2. Connect the appropriate interface cable to the base. Make sure the cables are secured in the wireways in the bottom of the base and that the base sits…