Heatmiser PRT-EWTS Manual 

17, 31 Wireless Series Twitter: heatmiseruk Facebook: facebook.com/thermostats Want More Information? Call our support team on: +44 (0)1254 669090 Or view technical specications directly on our website: www.heatmiser.com PDF FAQ Heating Professionals: Request a copy of our product installation…

6, Pair Successful The Comms LED on the receiver should ash and then go out to indicate the pair is successful. The thermostat will display the communication icon. Pair Fail If the Comms LED does not ash there is a problem with the RF signal and you should reduce the distance between the therm…

9, 1615 Wireless Series Model: PRT-EWTS Note: This new temperature is maintained only until the next programmed comfort level. At this time, the thermostat will revert back to the programmed levels. Keypad Lock Indicator Set Temperature Set Icon Locking the Keypad The thermostat has a keypad l…

13, 2423 Wireless Series Model: PRT-EWTS 01 02 03 04 05 06 07 08 09 10 FEATURE Temperature Format Switching Dierential Frost Protection Temperature Output Delay Pairing Fail Safe Optimum Start Rate of Change Program Mode Floor Limit DESCRIPTION 00 = o C, 01 = o F (°C = Default) 0.5 o - 3…

4, Heatmiser PRT-EWTS 1 2 A B Installation Procedure Wall Mounting: Step 1 Fix the wall plate to the wall. Step 2 Push the thermostat onto the wall plate. Desk Stand: Step A Remove the thermostat from the wall plate. Step B Release the desk stand. Do Mount the thermostat at eye level. Read the instructions fully s…