Hunter 20171 Installation Manual

Installation Manual for Hunter 20171 Ceiling fan, Fan (1 pages)

Specifications:

26/26739-20171.pdf file (30 Sep 2023)
  • Manufacturer: Hunter
  • Category of Device: Ceiling fan, Fan
  • Document: 20171, File Type: PDF Installation Manual
  • Updated: 30-09-2023
  • Count of Pages: 1
Download 20171 Manual (1 pages)

Read PDF Document Online:

Data: UPD 30th September 2023

Hunter 20171 Ceiling fan, Fan PDF Installation Manual (Updated: Saturday 30th of September 2023 01:33:09 PM)

Rating: 4.4 (rated by 71 users)

Compatible devices: 26405, 21331, 45006-0109, Dante, 82004, Bolivar, 23781, Fairhaven.

Recommended Documentation:

Text Version of Hunter 20171 Ceiling fan, Fan Manual (Summary of Contents)

(Ocr-Read of Document's Main Page, UPD: 30 September 2023)


Hunter Fan Company

  41681-01 • 02/20/04

Step 1  Choose the Fan Site
Proper ceiling fan location and attachment to the building structure are 
essential for safety, reliable operation, maximum e  ciency, and energy 
savings.
Choose a fan site where:
•   No object can come in contact with the rotating fan blades during normal 
operation.
•     e fan blades are at least 7 feet above the  oor and the ceiling is at least 8 
feet high.
•     e fan blades have no obstructions to air  ow, such as walls or posts, 
within 30 inches of the fan blade tips.
•     e fan is directly below a joist or support brace that will hold the outlet 
box and the full weight of the fan.
Tools and Supplies You May Need 
Checklist for Existing Fan Site 
If you want to use an existing fan site, complete the following 
checklist to determine if the site is acceptable and safe for your 
new Hunter fan. If you cannot check o  every item, prepare a new 
fan site as described on this page.  
Fan Support System
o Fan attaches directly to building structure.
o Fan support system will hold full weight of the fan and light 
kit.
Ceiling Hole
o    e outlet box clearance hole is directly below the joist or 
support brace.
Outlet Box
o    e outlet box is an UL-approved octagonal 4” x 1-1/2” outlet 
box (or as speci ed by the support brace manufacturer).
o    e outlet box is secured to the joist or support brace by 
wood screws and washers through the inner holes of outlet 
box.
o    e outer holes of the outlet box are aligned with joist or 
support brace.
o    e bottom of the outlet box is recessed a minimum of 1/16” 
into ceiling.
Wiring
o    e electrical cable is secured to outlet box by an approved 
connector.
o  Six inches of lead wires extend from outlet box.
If your existing fan site is suitable, go to your fan manual and begin 
with 2 • Installing the Ceiling Plate.
Step  2 Cut the Ceiling Hole
2-1.  Locate the site for the ceiling hole directly below the joist or support 
brace that will hold the outlet box and fan.
2-2.  Cut a 4” diameter hole through the drywall or plaster of the ceiling. You 
will use the hole to install the support brace and outlet box.
Step 3  Install a Support Brace, If Necessary
Determine if there is a ceiling joist directly above the ceiling hole. If the joist 
is there, determine if it is positioned to allow you to recess the outlet box a 
minimum of 1/16” into the ceiling. If NOT, install a support brace as follows:
3-1.  Attach a 2” x 4” support brace between two joists.  Position it to allow 
you to recess the bottom of the outlet box a minimum of 1/16” into the 
ceiling. 
3-2.  Check the support brace to ensure it will support the full weight of the 
fan and light kit. 
Step 4  Install the Outlet Box
4-1.  Obtain a UL-approved octagonal 4” x 1-1/2” outlet box, plus two #8 x 
1-1/2” wood screws and washers, available from any hardware store or 
electrical supply house.
4-2.  Orient the outlet box so that both the inner and outer holes in the box 
align with the joist or support brace.
4-3.  Drill pilot holes no larger than the minor diameter of the wood screws 
(5/64”) through the inner holes of the outlet box.
4-4.  Attach the outlet box directly to the support brace or joist with two #8 x 
1-1/2” wood screws and washers.    e bottom of the outlet box must be 
recessed a minimum of 1/16” into the ceiling.
Step 5 Prepare the Wiring
5-1.  Make sure the circuit breakers to the fan supply line leads and associated 
wall switch location are turned o .  If you cannot lock the circuit 
breakers in the o  position, securely fasten a prominent warning device, 
such as a tag, to the service panel. 
5-2.    read the fan supply line through the outlet box so that the fan supply 
line extends at least 6” beyond the box.
5-3.  Attach the fan supply line to the outlet box with an approved connector, 
available at any hardware store or electrical supply house.
5-4.  Make certain the wiring meets all national and local standards and ANSI/
NFPA 70.
You have now successfully prepared your ceiling fan site.  For instructions to 
install your ceiling fan, go to your fan manual and continue with 2 • Installing 
the Ceiling Plate.
 
CAUTION:  All wiring must be in 
accordance with national and local electrical 
codes and ANSI/NFPA 70.  If you are unfamiliar 
with wiring, use a quali ed electrician.
Fan Support 
System
Outlet BoxFan Support 
System
Wiring
Suitable Existing Fan Site
•   Drill
•   Keyhole saw
•   2’ x 4’ support brace
•   UL-approved octagonal 
4” x 1-1/2” outlet box
•   Two #8 x 1-1/2” wood screws 
and washers
•   Approved connector for 
electrical wire
Preparing the Fan Site
8’ Minimum 
Ceiling Height
7’ Minimum 
to Floor
30” From 
Wall or 
Nearest 
Obstruction
Step 5
Step 4
Steps 2 – 3





DOC-998cbf3:

Recommended:
RK 18, 110LP, LD-236DLH-B, SPIRIT DUAL SPD-J

LOSONE SELECT L400K, HAOF1220, G1G170-AB05-20, 23898, CX242DDWT, MS 7308
  • SAVE THIS WARRANTY INFORMATIONA. The quality controls used in the manufacture of this Holmes product are to ensureyour satisfaction.B. The Warranty Registration Card enclosed with this product must be completedand returned within 10 days of purchase for your Warranty to be effective. This ...

    Model & Doc Type: HAOF1220 4

  • Operating instructionsK3G097-AS82-82Translation of the original operating instructionsebm-papst Mulfingen GmbH & Co. KGBachmühle 2D-74673 MulfingenPhone +49 (0) 7938 81-0Fax +49 (0) 7938 [email protected]. SAFETY REGULATIONS AND NOTES11. SAFETY REGUL ...

    Model & Doc Type: K3G097-AS82-82 10

  • Read and Save These InstructionsForm 613083For the PVD with hurricane construction that complies with Florida Building Code including High Velocity Hurricane Zones (HVHZ) see the ADDITIONAL INSTALLATION AND MAINTENANCE INSTRUCTIONS on page 4.GENERAL SAFETY INFORMATIONWARNING: ROTATING PARTS & E ...

    Model & Doc Type: PVD EC 14

  • LE10XRT Due to continuing product development, specications are subject to change without notice. © 2016 RenewAire LLC138276_000 LE10XRTMan_Dec15.indd 12/2015 www.renewaire.com ...

    Model & Doc Type: LE10XRT 20

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 Harbor Breeze
CPW1413
19 13/03
2 Window Master
CompactSmoke WSC 320
27 17/09
3 Renson
Cbase
68 09/01
4 Bosch
DPH36652UC
20 16/02
5 Korona
81008
94 13/03
6 CFM
CDB-07
8 0.6 Mb 14/09
7 Hydrotek
Active Air 112010
4 22/03
8 Vents
100 Quiet-dMEV DC
24 03/02
9 Wow
W100
31 16/02
10 Air King
AKLCSLN
12 0.22 Mb 15/02

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 NETGEAR
WG111IS
54 23.03.2024
2 Epson
ActionNote 650
7 0.25 Mb 14.11.2023
3 Kenwood
DP-6020
24 15.10.2023
4 HTC
Touch Pro Alltel
164 11.02.2024
5 Sawo
CIRRUS ROCK CRR-30NB
20 27.03.2024
6 Ecler
PAM1100
42 14.03.2024
7 Yamaha
RX-V1600
123 2.18 Mb 23.10.2023
8 MTD
116-142A
10 31.10.2023
9 Cisco
SPA501G
2 1.35 Mb 21.10.2023
10 Philips
HR5887/00
2 09.10.2023
Operating Impressions, Questions and Answers: