MiTAC A770 Operator's Manual

100, SetupConfiguration Utility 3-19 2. When you device cannot find enough free resources that it can use. 1. Because of a less IRQ, You can release IRQ as below: COM 3 will disable, release resource I/Q address 3E8H~3EFH, IRQ 5, then must save and …

25, System Overview 1-5 1-5 Notebook Features Items 1 through 18 identifiy the major features designed into the A770 computer. A brief description will accoumpany each call-out to help you get stated and become familiar with your A770. Some of the features described in this section migh…

93, SetupConfiguration Utility 3-12 Power-on Password allows you to set the password for your system. When typing Power-on password, first make usre that Num Lock is off, then type your Power-on password in the entry fields and press Enter. Confirm your Power-on password by typing it again and p…

27, MiTAC A770 System Overview 1-7 12. Sealed I/O Access Door ( Rear Panel) 13. Bay 2/Access Door 14. Removable Hard Disk Drive Module/Access Door 15. Removable Primary Battery/Access Door 16. Audio Jacks 17. PCMCIA/CardBus Slots 18. Removable Floppy Disk Drive/Bay 1 Figure 1-3 I/O Access…

43, System Overview 1-23 1-5.4.4 CHARGE LED Indicator Status 1. When you insert the battery pack into the system and the AC power adapter is already connected, the CHARGE LED (Orange) flashes three seconds or more and then stays “On” during the charge period. 2. When no battery pack i…

105, Notebook Maintenance 4-4 ? Battery traveling with your computer, make a backup of your hard disk data into floppy disks or other storage devices. As an added precaution, buring along an extra copy of your important data. ? Make sure the battery pack is fully charged. ? Make …