HPE GL20 Maintenance And Service Manual

38, HPE GL20 The date must be entered in the MM/DD/YY format. The time must be entered in the HH:MM:SS format. 6. Do one of the following: • Press the F4 key to save the new values and exit. • Press the Esc key to exit without saving. Advanced tab The Advanced tab has the following menu opt…

19, If you must dismount the gateway or remove a non-hot-plug component from the gateway, then you must power down the gateway. 2. Dismount the gateway. If the environment, cabling configuration, or the gateway location creates unstable conditions, then dismount the gateway and place it …

8, Customer self repair Hewlett Packard Enterprise products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow for greater flexibility in performing defective parts replacement. If during the diagnosis period Hewlett Packard Enterprise (or Hewlet…

17, Removal and replacement procedures Required tools You need the following items for some procedures: • T-10 Torx screwdriver • M3.5 (3.5 mm) flathead screwdriver • M3 (3 mm) Phillips screwdriver Safety considerations Before performing service procedures, review all the safety informat…

36, Troubleshooting Supported operating systems and drivers matrix Operating system support For more information on Hewlett Packard Enterprise Certified and Supported systems for the operating systems available for your system, see the Hewlett Packard Enterprise OS support website: http://www.…