Inovonics EN6080 Operation & User’s Manual

49, Glossary 3.18.15 06443E © 2015, Inovonics - www.inovonics.com 48 Signal level Signal strength of a message as measured in decibels, ranging from 0 to 99. Signal margin The difference between the signal level of a message and noise floor of channel. Status message A status message is a superv…

32, Device Setup 3/18/15 06443E © 2015, Inovonics - www.inovonics.com 31 6.1.1 Manually Register a Device 1. Enter the transmitter number of the Inovonics device to be registered in the “TX ID” field. The TX ID label is usually found on the printed circuit board of the device, or in the…

36, Device Setup 3/18/15 06443E © 2015, Inovonics - www.inovonics.com 35 • Type represents the Inovonics model number of the end device, including:  EN1210, EN1210-240, EN1210-60, EN1210EOL, EN1210W, EN1210W-60, EN1212, EN1212-60, EN1215, EN1215EOL, EN1215W, EN1215WEOL, EN12…

23, Inovonics EN6080 3/18/15 06443E © 2015, Inovonics - www.inovonics.com 22 Chapter 4 Partitions 4.1 Partitions The partitions tab is used to add, delete and manage partitions. Partitions are user defined controllable areas to which devices are assigned and managed as a single entity. For instance, “…

17, 3/18/15 06443E © 2015, Inovonics - www.inovonics.com 16 Chapter 3 ACG Setup 3.1 User Administration When the ACG setup tab is clicked, the user administration screen displays. The user administration screen is used to edit user and admin passwords, and provides access to the IP…

10, EN6080 Area Control Gateway Overview 3.18.15 06443E © 2015, Inovonics - www.inovonics.com 9 4. For each of those entries in the Interfaces folder, create two DWORD registry keys called TCPAckFrequency and TCPNoDelay. Figure 1-3 Create DWORD registry keys Here’s an example what it …