Intersil ISL94203EVKIT1Z Operation & User’s Manual

15, Application Note 1952 15 AN1952.1 July 30, 2015 Submit Document Feedback ISL94203 RAM MEMORY ISL94203 GUI RAM TAB ISL94203 MAIN SCREEN FIGURE 26. ISL94203 GUI RAM UPDATE OPERATION (READ OPERATION NUMBERED) 2 3 1 NOTE: “Read Voltages (Single)” or “Read Status Bits” Operation executio…

3, Application Note 1952 3 AN1952.1 July 30, 2015 Submit Document Feedback FIGURE 2. ISL94203EVKIT1Z BOARD SETUP ISL94203EVKIT1Z MCB_PS_Z BOARD SET I 2 C ADDR SET xT2 THERMISTOR TO FET OR TO CELL CELL BALANCE LEDs ISL94203INTFACEKIT1Z TO PC USB PORT WAKE UP CONTROL TO USB-I2C BOARD…

8, Application Note 1952 8 AN1952.1 July 30, 2015 Submit Document Feedback FIGURE 9. ISL94203 GUI THERMISTOR TAB FIGURE 10. VOLTAGE TO TEMPERATURE CONVERSION 0.000 0.100 0.200 0.300 0.400 0.500 0.600 0.700 0.800 -50 0 50 100 150 TEMPERATURE (°C) INPUT VOLTAGE (V) …

13, Intersil ISL94203EVKIT1Z Application Note 1952 13 AN1952.1 July 30, 2015 Submit Document Feedback The Internal AD Utility form is a separated form that can be closed or minimized independent of the main screen (see Figure 24). FIGURE 24. To quit the program, click on “Quit”. …

14, Application Note 1952 14 AN1952.1 July 30, 2015 Submit Document Feedback Tab Controls ISL94203 Memory Access RAM The ISL94203 has two main memory areas, RAM and Configuration Memory. The RAM area contains the transient values, such as cell voltages, status bits and microcontroller override condi…

19, Application Note 1952 19 AN1952.1 July 30, 2015 Submit Document Feedback (NO USER SHADOW RAM) COPY COPY COPY ISL94203 DEVICE CONFIGURATION RAM ISL94203 DEVICE EEPROM MEMORY (EEPROM SHADOW MEMORY) ISL94203 GUI EEPROM TAB ISL94203 GUI PACK SETTINGS TAB FIGURE 30. ISL94203 GUI PACK SETTINGS T…