JCM TSP - 02 Operation And Maintenance Manual

18, JCM TSP - 02 925 Pilot Road, Las Vegas, Nevada 89119 Office: (800) 683-7248, Tech. Support: (702) 651-3444, FAX: (702) 651-0214 E-mail: [email protected] http://www.jcm-american.com …

13, Sensor Calibration - Calibrate the Mark and Exit sensors. Continuous Ticket Printer Test - Printer will print one ticket after another (Previously printed ticket does not have to be removed.). Sensor Adjustment Data - Mark sensor and Exit sensor adjustment data is printed on ticket. Test …

14, Maintenance Sensor Adjustment Procedure • Make sure printer power is turned off • Turn ON all four DIP switches • Open the printer and insert the reference paper (Part No. 501-000059) • Turn on printer power • Wait for the LED to flash (On - 100ms, Off - 1 sec.). You may …

8, General Specifications: Con’t Installation Indoors Avoid direct sunlight A lengthwise installation angle between 0 0 and 45O Angle Operating Environment Temperature : +5 0C ~ +450C (410F ~ 1130F) Humidity : 10 ~ 90% RH (no condensation) Storage Environment Temperature : -250C ~ +700C (770F …

12, Dip Switch Settings DIP Switch 1 2 3 4 Function 0 0 0 0 Normal operation (interfaced with a host controller) 1 0 0 0 Reserved 0 0 0 1 Ticket print test 1 0 0 1 Continuous ticket print test 0 1 0 1 Reserved 1 1 0 1 Sensor adjustment data 0 0…