Jesco TOPAX DX Operating Instructions Manual

10, 10 | BA-40100-02-V17 TOPAX ® DX Multichannel controller Two link plugs/jumpers have to be connected to the TOPAX DX (the last one in the network) for the 120 ohm switch, Pull-up and Pull-down re- sistances. The resistances are not active when the system is delivered. The resista…

6, 6 | BA-40100-02-V17 TOPAX ® DX Multichannel controller Load capacity of the relay 230 V AC, 3 A (ohmic resistive load) Protection class IP 65 with locked screw connections Ambient temperature -5°C ... +45°C Air humidity 95% non-condensing *) max. 0.5mm² with cable end sleeve…

14, 14 | BA-40100-02-V17 TOPAX ® DX Multichannel controller 4.8 Operation and keyboard layout ① ② ③ ④ ⑤ ⑥ Fig. 13: Housing of the TOPAX DX with operating panel. The keys are integrated in a keyboard and react to contact. Keys Functions Arrow key cross • Menu cha…

55, Jesco TOPAX DX BA-40100-02-V17 | 55 Operating instructions 25 Troubleshooting and diagnostics All errors are indicated in clear text on the display of the TOPAX DX. If several errors occur simultaneously, the error messages can be viewed with the ▲ and ▼ keys. The following error displays and messages …

33, BA-40100-02-V17 | 33 Operating instructions mg/l mVpH ∞C ESC 039 702 719 632 ab<=> 01 Set_2 preselects 1.4.8.1 edit name and save ab<=> AB save Fig. 33: Main menu >> status >> presettings >> apply Enter the name of the pre-adjustment using the ar…

9, BA-40100-02-V17 | 9 Operating instructions 4.4.3 3-fold Input block (Code 78404): With 3 measurement inputs for: • Disinfection (potentiostatic measuring cell) • Position feedback of a servo motor with potentiometer • A 0/4 ... 20 mA current input for the connection of a disturbance v…