Johnson Level & Tool LDM330 Instruction Manual

28, 28 ©2017 Johnson Level & Tool 10. Press the button. “CAL 3” will appear on the screen followed by “OK.” 11. Rotate the Laser Distance Meter 180 degrees so the laser beam is pointing towards you and the screen is facing the sky. 12. Press the butto…

6, 6 ©2017 Johnson Level & Tool 5. Location of Parts/Components LCD Screen Subtraction Button Addition Button Power Button Press for: • Power on • Set units of measurement Press and hold for: • Power off Measure Button Press for: • Power on • Measure Press and hold for: �…

11, Johnson Level & Tool LDM330 ©2017 Johnson Level & Tool 11 To select a mode, press the button. When there is no measuring mode icon shown near the top left of the LCD screen, the instrument is in the Length measuring mode. The selected measuring mode icon will display near the top left of the LCD screen for the Ar…

30, 30 ©2017 Johnson Level & Tool (for volumes). You can adjust the corners of the rectangles or cubes to adjust for any perspective distortion in your photo by dragging the ends of the line segments. Select the check mark icon to finish your dimension lines. Next, take your measurements …

29, ©2017 Johnson Level & Tool 29 8. Using the Bluetooth ® Measure-Up TM App This LDM features Bluetooth ® for integration with your Android or iOS smartphone or tablet. The app allows you to photograph and dimension your jobsite. The dimensioned drawings can be saved or exported to ema…