JUMO mTRON T Operating Manual

113, 113 12 Parameterization Selecting parameterization Parameterization (parameter level) is a function of the device manager. It is only available if a user is logged on and the user has the corresponding usage rights. ➥ The function starts. User "Master" logged on ➥ The …

130, JUMO mTRON T 13 Configuration 130 Barc.->curr. batch Yes ( ), No ( ) If "Yes", the "Current batch" visualization will automatically be shown when the corresponding barcode is scanned.  Chapter 7.8 "Current batch", page 69 Simulate inputs Yes ( ), No ( ) If "Yes&qu…

70, 7 Visualization 70 Batch status The batch status indicates whether batch reporting is in progress or is waiting for a start signal. Batch texts, "right column" The texts in the "right column" are predetermined by the configuration and can be changed in various way…

123, 123 13 Configuration 13.3 Device data 13.3.1 Device data Setup dialog Parameter Parameter Selection/settings Description Device name HMI (example) (max. 20 characters) The device name is used in the setup program, Web server, and the PCC and PCA3000 PC programs. Memory alarm 0 to 20 to …

37, 37 4 Electrical connection 4.1 Installation notes Requirements for the personnel • Work on the modules must only be carried out to the extent described and, like the electrical connection, only by qualified personnel. • Before plugging and unplugging connection cables ensure that t…

197, 197 13 Configuration 13.18.3 Analog signals (overview) The following table contains all analog signals that are available for connecting to the analog inputs of the multifunction panel. Category Signal Description Inactive No signal selected Central processing unit Analog variabl…