Kaba 52 Operating Instructions Manual

4, SET DELAY TIME AND OPENING WINDOW* * This feature is only available on the Model T52 lock. 1. For self-powered lock, power 44 44 4 33 33 3 the lock G R 88 88 8 2. Press . Press . G 88 88 8 3. • For Single Mode EE EE E (Factory combination is “50 25 50”.) …

5, Kaba 52 Manager User Operations These operations are only available in Single Mode and can only be performed by the Manager User (User 1). All Manager User Operations involve management of User 2. User 2 can have a lock access status of “Enabled” or “Disabled”. If “Enabled”, U…

1, 52 SERIES MODELS 52 & T52 OPERATING INSTRUCTIONS The following instructions cover Model 52 & T52 lock operations. The lock models operate the same except for an additional feature that is found in the Model T52 that allows you to program a time delay for lock opening and an opening win…

6, Battery Maintenance The battery must be maintained for both Battery powered locks and Battery Assist locks. REPLACE BATTERY 1. Enter a valid combination and open the lock. Note: For a Battery powered lock if the existing battery will not provide enough power for you to open the loc…

2, LOCK OPERATION & RESPONSES • To “power” a self-powered lock, turn the dial back 44 44 4 and forth 33 33 3 in both directions. • The lock is “powered” when simultaneous green G and red R flashes display with a beep 88 88 8. • Each keystroke generates a …