KERN 1500-2M Manual, Operating Instruction

2, EW-BA-defsi-0620 17 1 Technical data KERN EW 150-3M EW 600-2M EW 1500-2M Readout (d) 0,001 g 0,01 g 0,01 g Verification value (e) 0,01 g 0,1 g 0,1 g Weighing range (Max) 150 g 600 g 1.500 g Min. load (Min) 0,02 g 0,5 g 0,5 g Taring range 150 g 600 g 1.500 g Repro…

10, EW-BA-defsi-0620 25 9 Operating the balance 9.1 Warm-up time Optimum weighing results are being achieved when starting to operate the balance only 5 minutes after turning the balance on. 9.2 Power display If the symbol (*) is visible, the balance is provided with power via th…

12, EW-BA-defsi-0620 27 10 General program settings The balance leaves the factory with the factory settings being set. This is the standard configuration of the balance. It is marked by a *. It can be altered as follows: Press the F key for about 4 seconds until Func appear…

9, EW-BA-defsi-0620 24 8.2 Adjusting (CAL) Adjustment should be carried out with the recommended adjusting weight (see Chapter 1 „Technical Data“). The adjustment can also be carried out with different adjusting weights (see table), but not ideal from a metrological point of view. Mode…

6, KERN 1500-2M EW-BA-defsi-0620 21 Display panel 5 Installation Please note that your KERN balance is a precision weighing instrument. Even if the instrument is made for robust and continuous use, please handle it carefully and do avoid unnecessary use. The balance requires a warm-up time…